This factory cleaning checklist is important to how good a job is performed because it streamlines all tasks thus eliminating guesswork.

A factory is always a busy area that needs to be kept clean while minimizing interruptions to the production process.

This requires specialized cleaning and to do that, an important tool is needed; the cleaning checklist.

In this article, we’ll be providing you with a checklist of cleaning tasks that should be carried out.

Types of Factories

Specialized commercial cleaning services are the best fit for factories.

This means you’ll need to be well equipped for the task at hand. Now, there are different factories whose cleaning needs may differ. Despite the different cleaning needs of the different industries, the main goal is the same; to get rid of dirt.

Factories are quite varied in their line of operations as well as the type of products produced.

Broad categories include clothing and textile factories, petroleum (including chemicals and plastics), electronics (consisting of computers and transportation) as well as food production & processing. Other categories include metal manufacturing, wood, leather and paper and so many more.

The cleaning needs for different factories may require different approaches. However, the aim remains the same.

Factory Cleaning Equipment

The cleaning equipment used in factories should be designed for heavy-duty use. This is a commercial area with lots of mess to be cleared up. Hence it will need the most efficient tools and machines as well as supplies to get the job done.

Basic cleaning tools for a factory include floor scrubbers, floor sweepers, scrubber dryers, industrial vacuum cleaners, and pressure washers. There are also hot pressure washers, floor buffers, and polishers, chewing gum removal machines, and much more.

There are lots of reliable cleaning product brands to choose from. Some of these include Viper, Ehrle, Tomcat, Craftex, Truvox, and Kranzle. Others are Edge, Prochem, Karcher and MAC, etc.

Procedures in A Factory Cleaning Schedule Checklist

The cleaning requirements for a factory depend on the type of factory you’re dealing with. Whatever the case may be, these cleaning actions are pretty much the same. All of these are geared towards getting rid of debris, dirt, or stains.

Certain sections of a factory will need to be cleaned daily while others will require periodic cleanup. Everyday cleaning will focus on the administrative area as well as some parts of the production or manufacturing area.

Administrative Area

For administrative areas of a factory, cleaning tasks will include cleaning the offices, the reception, restrooms, and kitchen areas.

  • Cleaning the Offices

There will be several offices within the administrative area of a factory. These will require daily cleaning. Also, some detailed cleaning can be scheduled on a weekly or monthly basis. Daily cleaning of the office areas should include simple tasks such as dusting and wiping down furniture.

Other tasks include tidying up the shelves as well as desks and cleaning office equipment. Such equipment includes computers, printers, scanners, and telephones among others. Also, sweep or vacuum office floors and empty the trash.

Weekly cleaning will be more thorough. It should include wiping down the walls and baseboards, cleaning the windows, and dusting the blinds. Cobwebs should be removed and ceiling fans dusted.

  • Cleaning the Reception Area

The reception area of a factory’s administrative block shouldn’t be left out of the cleaning process. Daily cleaning should include cleaning and sanitizing touchpoints such as door handles. Seats and other furniture should be wiped clean too.

If there are shelves or cabinets here, they should be dusted and trash cans emptied. Floors should also be swept or vacuumed.

  • Cleaning the Restrooms

Restrooms within factories will be frequently used and need proper cleaning to keep them clean and usable throughout the day. Tasks that must be performed at the start of the day include scrubbing the toilets as well as urinals and sanitizing them.

Next, all touchpoints such as doorknobs and surfaces like countertops, and tap heads should be disinfected. Floors should be cleaned and mopped. When performing this cleaning task, a multipurpose cleaner with disinfecting properties should be used for such cleaning.

Cleaning must also be done at different intervals or shifts during the day to keep toilets clean and usable.

  • Kitchen Areas

The kitchen areas should be kept clean by washing all dirty dishes and cleaning all appliances.

Such appliances may include toasters, microwave oven, refrigerators, and burners. These should be wiped clean including sinks and countertops. The same applies to cabinets.

Production or Manufacturing Area

This area(s) of a factory need specialized cleaning. Here, a wide range of tools or equipment may be needed. Some heavy-duty cleaning may be required as such, you’ll need to prepare beforehand.

Cleaning may take different forms ranging from post-construction cleaning to spills and general cleaning or maintenance of machines. It all depends on what specific cleaning tasks are needed. Dry and wet vacuum cleaners may be used depending on what you’re dealing with.

While dry vacuum cleaners are used to clear up or suck up dirt, wet vacuum cleaners will be used for major spills.

  • Cleaning the Factory Floor

The factory floor will need to be kept clean daily. These are large areas and will require floor sweepers to get the job done in little time. Scrubbers and dryers will also be needed to keep the factory floor clean. It is necessary to be knowledgeable about the basic cleaning machine operations.

Blowers may be deployed to get rid of dust settled on heavy machinery. Factories may have large tanks that will need to be cleaned. Such cleaning may involve the interior, exterior, or both. For interior cleaning of such tanks, specialized equipment will need to be used to safely get in and out.

A variety of pressure washers may be needed for different cleaning tasks within the factory. It is also important to note that spills may occur at any time of day. Therefore, your services will be required to get rid of the resulting dirt.

  • Cleaning Frequency

Daily cleaning of the production area isn’t as detailed as weekly or monthly cleaning. For more thorough cleaning, certain machines may need to be dismantled or put off to ensure that dirt is properly cleared off.

This factory cleaning checklist highlights the different tasks to be performed. However, due to the different types of factories available, cleaning tasks may differ from one type to the next. Nevertheless, the aim remains the same; to get rid of dirt.